ICE 62 Targa

Name: ICE 62 Targa
Brand: ICE Yachts

In production

1 / 10

Ice62-targa-spice-08 — ICE Yachts

Design

Naval architect: Felci Yacht Design

Summary

Sailing MonohullSail

Length overall: 59 ft
Beam: 17.1 ft
Draft: 7.5–12.8 ft
Displacement: 43,872 lb
Sail area (upwind): 2,583 ft²
Cabins: 3

* A standard reference image, not the actual boat — shown to help visualise this model's published dimensions.

Best Suited For

Performance Cruising
From the published figures: SA/D 33.2 (upwind 240 m², displacement 19900 kg) · 3 cabins
Liveaboard
From the published figures: LOA 17.99 m · 3 cabins · 2 heads · fresh water 1040 L

Tags are derived from certified class, length, sail area, accommodation and tankage using the criteria described on the Sources page; an editor may add or remove one.

Sailing Ratios

Classic yacht-design ratios worked out from the builder's published figures, each shown against the bands designers read it by.

Sail area / displacement

How much sail the boat carries for its weight — its power in light air.

33.2· Racing

How it is worked out

sail area (ft²) ÷ (displacement as ft³ of seawater)^⅔

published upwind sail area

Displacement / length

How heavy the boat is for its waterline length. Lower is lighter and quicker; higher is steadier and roomier.

117· Light

How it is worked out

displacement (long tons) ÷ (0.01 × waterline length in ft)³

Ballast ratio

The share of the weight carried in the keel — a rough guide to stiffness, though how deep that weight sits matters as much.

31· Moderate

How it is worked out

ballast ÷ displacement × 100

Comfort ratio

Ted Brewer's measure of how gently a boat moves in a seaway. Higher means a slower, easier motion.

27.3· Coastal

How it is worked out

displacement (lb) ÷ (0.65 × (0.7 × LWL + 0.3 × LOA) × beam^1.333), lengths in ft

Capsize screening

A guide from the inquiry after the 1979 Fastnet race: below 2 was taken as suited to ocean passages. It ignores hull shape and where the ballast sits.

1.93· Below 2

How it is worked out

beam (ft) ÷ (displacement as ft³ of seawater)^⅓

Hull speed

Roughly the speed a displacement hull reaches before it has to climb its own bow wave.

9.9 kn

How it is worked out

1.34 × √(waterline length in ft), in knots

Most builders publish a light displacement. The ratios were defined on a loaded boat, so every boat here reads a little lighter than a surveyor's figure would — all alike, which keeps them comparable.

Tanks

What the builder publishes about how fast, how strong and how much the boat carries.

Fuel and water on one scale: a tank twice the height holds twice as much.

Fuel211 gal
Water275 gal

Dimensions

LOA: 59 ft (17.99 m)
Hull length: —
LWL: 55.1 ft (16.8 m)
Beam: 17.1 ft (5.2 m)
Draft (min): 7.5 ft (2.3 m)
Draft (max): 12.8 ft (3.9 m)
Air draft: —
Displacement: 43,872 lb (19,900 kg)
Ballast: 13,669 lb (6,200 kg)
Cabins: 3
Heads: 2
Berths: —

Sail Plan

Main sail: —
Jib: —
Genoa: —
Sail area: 2,583 ft² (240 m²)
Downwind sail area: 3,875 ft² (360 m²)
Rig type: —

Engine and Tanks

Engine: —
Engine count: —
Engine manufacturer: —
Propulsion type: —
Fuel capacity: 211 gal (800 L)
Fresh water capacity: 275 gal (1,040 L)
Black water capacity: —

Construction

Mast material: —
Hull material: carbon/glass epoxy sandwich
Deck material: —
Keel type: —
Rudder type: —
Steering wheels: —

Builder's Own Figures

Mast: Carbonio
Engine: 195 CV
Construction: Infusione resina epossidica, Sandwich, Vetro/Carbonio
Engine power basis: printed in CV (Italian horsepower) only; hp left empty
Displacement basis: as printed (19,90 t)
Draft as printed: 2,30/3,90 m
Sail area basis: 'Superficie velica' as printed

Figures read fromiceyachts.it/ice-62-targa/· datiread 9/18/2026

About ICE Yachts

Semi-custom

Italian builder of carbon-epoxy performance cruisers from Salvirola near Cremona — fourteen Felci-designed monohulls from the 15.8-metre ICE 52 to the 24-metre ICE 80, plus the ICE Cat sixty four and seventytwo catamarans by Micheletti+Partners, all infused in carbon and glass with carbon rigs.

Visit brand page